highwood Adirondack AD-ADRID29A Manual de montaje - Página 2
Navegue en línea o descargue pdf Manual de montaje para Mobiliario exterior highwood Adirondack AD-ADRID29A. highwood Adirondack AD-ADRID29A 2 páginas. Folding & reclining adirondack chairs
También para highwood Adirondack AD-ADRID29A: Manual de montaje (2 páginas)
Imprimir páginaBACK
BACK SUPPORT BRACE
BOARD FROM STEP 3
FRONT LEG BRACE
NEVER adjust the level of recline while you are sitting in the chair, or while anyone else is in the chair.
Always adjust with an empty chair and ensure that the back support is completely secure in the recline
slots on each side of the chair. To fold the chair, lift the back support and gently push down on the back
ARM
C
FACES OUT
LEG
D
SEAT
B
FRONT LEG
A
IMPORTANT NOTE!
of the chair. The chair will collapse down to the floor level.
For information on Care and Cleaning or to Register your
highwood product, please visit www.highwood-usa.com.
STEP 4-5
Attach Arm to Back using Bolt C.
Insert Bolt from Arm, through Back
Support Side, into the Back.
(Note: Screws face outward on Back
Support Brace)
Repeat on other side.
STEP 6-7
Turn chair over. Place Washer
D in between Seat and Leg.
Attach using Bolt B.
Repeat on other side.
STEP 8-9 FOR AD-KING1 MODELS
with included Front Brace ONLY
**A Front Leg Brace is not included with
AD-CHL1 and AD-ADRID29A Models.**
Attach Front Leg Brace to Front Leg using
(3) A Screws.
Repeat on other side.
AD-CHL1|AD-ADRID29A|AD-KING1
02.08.21
PAGE 2 OF 2