highwood Sequoia Professional CM-TBLSQ36 Manual de montaje - Página 2

Navegue en línea o descargue pdf Manual de montaje para Mobiliario exterior highwood Sequoia Professional CM-TBLSQ36. highwood Sequoia Professional CM-TBLSQ36 2 páginas. National picnic table
También para highwood Sequoia Professional CM-TBLSQ36: Manual de montaje (2 páginas)

Imprimir página
LEG ASSEMBLY
TABLE TOP END SUPPORT
B
DETAIL 3
3
SEAT SUPPORT
DETAIL 5
SEAT ASSEMBLY
SEQUOIA
PROFESSIONAL
by
TABLE TOP
C
2
BRACE
BRACE
TABLE TOP RAIL
SEAT ASSEMBLY
D
TABLE TOP
B
For information on Care and Cleaning or to Register your
SEQUOIA PROFESSIONAL product by highwood , please visit
DETAIL 2
A
4
DETAIL 4
SEAT SUPPORT
SEAT SUPPORT
www.highwood-usa.com.
4) Start by Placing the Table Top Facing
Down as Shown here to the Left.
5) Attach the Leg Assembly to the Table Top
End Support with (4) C Bolts. Ensure the
Seat Support Faces the Outside of the Table
as Shown to the Left.
6) Repeat (4) and (5) for the Other Leg
Assembly on the Opposite Side of the Table
Top.
7) Attach the Brace to the Seat
Support using (1) B Bolt.
Reference Detail 3.
8) Attach the other end of the
Brace to the Table Top Rail
using (2) A Bolts. Reference
Detail 4.
9) Repeat (7) and (8) to attach
the 3 other Braces on each
Corner of the Frame.
10) Once all Braces are
attached, as Shown in Detail 5,
Flip the Table Upright With the
Help From Another Person.
11) Line Up the Seat Assembly
With the Bolt Holes in the Seat
Support.
12) Repeat (11) for the Other
Seat Assembly.
13) Attach the Seat Assembly to
the Seat Support Using (4) B
Bolts. Repeat for the Other Seat
Assembly.
14) Place the Umbrella Gromet
(D) in the Cutout of the Table
Top.
CM-TBLSQ36
07.12.2021
PAGE 2 OF 2