GALTRONICS 62-20-09 Instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje para Soporte para TV GALTRONICS 62-20-09. GALTRONICS 62-20-09 4 páginas. Outdoor das antennas

Imprimir página
Baylin TechnOlogies Company
Ultra Flat In-Building SISO Antenna [698-960MHz, 1695-2700 MHz]
C.
Antenna Mounting
Place the antenna rod on top of the pole and adjust the position
of the right bracket to the center of the pole. Tighten all bolts.
.
D
Cup Head Screw Installation
Electrical Specifi cations
Install 5/16" cup head set screw and
tighten to the appropriate torque. Lock
the antenna rod using the nylon flange
locking hex nut. Tighten hex nut to 15Nm
(132In*Lbs).
DO NOT REUSE LOCKING HEX NUT.
ONLY USE NEW LOCKING HEX NUTS
FOR ANTENNA MOUNTING ADJUSTMENTS.
.
E
Check Torque
After adjustment all loosened bolts
must be tightened with a torque of:
5/16˝ - 15Nm (132In*Lbs)
7/16˝ - 40Nm (354In*Lbs)
1˝ - 150Nm (1328In*Lbs)
Proprietary Information. All rights reserved. Galtronics reserves the right to modify or amend any antenna or specifi cation without prior notice.
Model No: 62-20-09 | Mounting instructions outdoor DAS antennas
ASSEMBLY INSTRUCTIONS
Copyright © 2016 – Galtronics Corporation Ltd.
w w w . g a l t r o n i c s . c o m
Antenna Rod / 1" Mount Adapter Rod
5/16" - Nylon Flange
page 4 of 4
Lock Nut (2x)