Galvani H1 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Calentador de alimentos Galvani H1. Galvani H1 7 páginas. Pro hand warmer

Imprimir página

CARE INSTRUCTIONS

Store your H1 and its batteries in a
cool, dry place. Do not store your H1 or
its batteries anywhere colder than -4°F
(-20°C) or hotter than 158°F (70°C).
Turn on your H1 five (5) minutes
prior to wearing for immediate
warmth when using.
Try to limit the inside of your H1's
exposure to moisture.
Open your H1's cuffs and hang it
vertically in a well-ventilated area
to keep the inside fresh.
10

SAFETY INFORMATION

Do not leave your H1 unsupervised
when powered on.
Parental supervision of children
younger than twelve (12) years of
age is recommended.
Disconnect the battery when not in use.
If the battery overheats, power your
H1 off, wait until you are able to safely
touch the battery pack, and disconnect
the batteries.
Do not use your H1 if the battery has been
punctured or otherwise damaged.
If your H1 or its batteries are damaged, do
not attempt to repair it yourself.

TROUBLESHOOTING

Galvani products are designed and manufactured to
the highest standards. If you encounter a problem,
check here for potential solutions. To see if your H1 is
eligible for repair or replacement, please consult the
Warranty information included with your unit.
The charger is blinking:
The charger is defective. Disconnect the
batteries and appropriately dispose of
the charger.
When powering your H1 on,
the LED blinks green then turns off:
The temperature sensing system is
either damaged or defective.
Your H1 will not change to the
next heat setting:
Inspect the LED Thermadjust button for
damage, something may be wrong with
the electrical system.
When powering your H1 on, neither
the LED or the H1 turns on:
The battery probably isn't charged.
Charge the battery and try again. If
the LED and H1 still won't turn on,
the battery may be damaged. Inspect
it, and dispose of it appropriately if
damage is found.
The heat in your H1 is uneven:
Inspect the H1 for damage due to
puncturing, stretching, and/or crushing.
If your issue is not listed here:
Contact Galvani customer service.
11