Coral Coral Series Manual de instalación y funcionamiento - Página 9

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Dispensador de agua Coral Coral Series. Coral Coral Series 15 páginas. Cabinet

Imprimir página

Initiating a manual regeneration.

The softener can perform two different types of manual regeneration

either immediate or delayed.

Immediate Regeneration.

To perform an immediate regeneration you need to press and hold the

regeneration button for around five seconds until the cam starts to move and

the egg timer shows on the screen.

Delayed Regeneration.

Quickly press and let go of the regeneration button once. The regeneration

symbol will appear and flash on the display. A single regeneration will start at

the default or pre set regeneration time, if you wish to cancel this delayed

regeneration simply quickly press the regeneration button again an the

symbol will disappear from the display.

Resetting the Valve Programming.

Occasionally it maybe necessary to reset the valve to factory defaults.

The programmed valve type (softener) can be checked by pressing and holding

the SET and DOWN buttons simultaneously for 5 seconds. H0 and a volume is

displayed e.g. H0 100, the valve has been set as a softener. If in doubt contact

your supplier.

To reset the valve: with H0 displayed, press and hold the SET for 5 seconds

The valve type will now be shown e.g. 255, 268. Choose the correct valve (255

or 268) and press the SET button. Three dashes will now show on screen, this is

the volume and should be set accordingly using the up and down arrows set the

amount applicable to your system (see following programming details)

It will now be necessary to reset the time, day, regeneration time and override

days as above.

Vessel Size

Type

Press ↓ & ■ together H0 appears) then press ■

Select type of valve

Media Volume to program (litres)

Parameter

Time of day (HH:MM)

Day of week (DAY)

Time of regeneration (HH:MM)

Calendar override days 740/760

Regen interval if P4 set to 0 (740 ONLY)

Salt amount (gms)

Capacity (Kg) 740 control (cannot change)

Capacity (Kg) 760 control

Hardness in ppm CaCO3

Standard

613 1012

817

Micro

Coral

Mistral Coral Swan

255

Set on site / Factory set default 2.00am

3/14

0.2

0.5

0.2

0.5

919 735

1023

835

Mistral

Swan

255

Set on site

3/14

Set on site if required

0.8

0.9

1.1

1.3

0.7

0.9

1.1

Set on site 760 only

935

1035

Swan

255

3/14

1.5

1.8

1.3

1.5

1.8