Coral UVCGY1 Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Secadora Coral UVCGY1. Coral UVCGY1 18 páginas. Coral uv sanitizer and dryer

Coral UV Sanitizer and Dryer

Maintenance

There are three main tasks to maintain your product to produce optimal drying and sanitizing results.

All procedures take just a few minutes and should be performed according to the schedule outlined

below.

ATTENTION: Do NOT use chemicals, cleaners, vinegar, or any other cleaning solutions on the product.

Frequency

Clean the interior of the product for watermarks and stains

Replace the HEPA filter

Replace the UV bulb

Clean the Product

It is recommended to use gloves when handling any of the components inside the chamber.

Fingerprints can affect the reflection of the UV light and can hinder the sanitization process.

Follow these steps to clean the Coral UV Sanitizer and Dryer.

1. Unplug the product.

2. Press the button on the front of the product and remove the basket.

3. Using a damp cloth, wipe the inside and walls of the chamber to remove any watermarks

or fingerprints.

4. Wipe with a dry cloth to ensure no marks are left behind on the stainless steel, as they can

negatively affect sanitization.

5. Wipe the basket in the same manner as the chamber.

Do NOT wipe the protective grate with water, as this could allow water to enter the UV light

IMPORTANT

chamber.

6. Reinsert the basket in the chamber, ensuring not to touch the inside walls or floor of the chamber.

Always wipe off the dry water spots after each use on the interior space. Dry water spots can hinder the

IMPORTANT

performance of the UV lights and cause damage to the stainless steel interior.

After every use

Every 3 months (depending on use)

Every 12 months (depending on use)