Coral Box AquaLink A1 Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Acuarios Coral Box AquaLink A1. Coral Box AquaLink A1 2 páginas.
Imprimir página
4. Connection to Power Supply: Power off your
original pump/ wave maker DC adapter, and then
connect to AQLink A1 DC jack input, the jack polarity
is as below:
5.
Finally, switch on the input power of the DC
adapter, the green LED will light up indicating the unit
start to operate normally.
(Fig.4 Programming Switch Setting for Supported Pumps sample)
DCA2000
1
DCS2000
3
DCP3000
5
DCP4000
DCA6000
DCW6000
7
DCS6000
DCQ6000
9
DCS7000
11
DCS9000
DCA3000
DCS3000
2
DCA3000
DCT3000
DCS4000
4
DCT4000
6
DCP5000
8
DCP6500
DCP8000
10
DCT8000
12
DCP10000
DCS12000
13
DCT12000
CP-25
15
CP-90
17
QP-9
19
Reversed
Warning
Precaution – Controller Installation
Please install the controller AWAY from wet, high humidity
and hotenvironment,excessive humidity and high temperature
operating environment may
DAMAGE THE CONTROLLER PERMANENTLY
Pleaseinstallinanenvironmentwithgoodventilation.This is to
allow the internal electronics working at the desired temperature
and operating environment, or else product durability will be
affected. Active ventilation is required when the operating
temperature is high
All right Reserved – No part or whole of this Manual can be reproduced without written
14
DCT15000
CP-40
16
CP-120
18
QP-16
20
GF150
authorization by Coral-Box.com