Dynex DX-CR212 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Lector de tarjetas Dynex DX-CR212. Dynex DX-CR212 13 páginas. Lecteur de carte mémoire 11-en-1
También para Dynex DX-CR212: Manual (6 páginas), Preguntas frecuentes (5 páginas), Manual de configuración rápida (2 páginas), (Spanish) Guía Del Usuario (13 páginas), (Francés) Manual De L'utilisateur (13 páginas)

11-in-1 Memory Card Reader

Formatting a memory card (Macintosh)

Caution: Formatting a memory card permanently deletes all files on the card. Be sure that

If your computer has trouble recognizing a new memory card, format the memory card in

your device or by using the computer.

To format a memory card:

1 Click Go, then click Utilities.

2 Double-click Disc Utility from the list.

3 In the left-hand column, select the memory card you want to format, then click the

Erase tab.

4 Specify a volume format and name for the memory card, then click Erase. A warning

box opens.

5 Click Erase again. The Erase process takes a minute or so to erase and reformat your

memory card.

Troubleshooting

If memory cards do not appear in My Computer/Computer (Windows operating systems) or

on the desktop (Mac operating systems), check the following:

• Make sure that the memory card is fully inserted into the slot.

• Make sure the card reader is fully connected to your computer. Unplug and reconnect

your card reader.

• Try a different memory card of the same type in the same slot. If a different memory

card works, the original memory card should be replaced.

• Disconnect the cable from your card reader and shine a flashlight into the empty card

slots. Look to see if any pin inside is bent, then straighten bent pins with the tip of a

mechanical pencil. Replace your memory card reader if a pin has bent so much that it

touches another pin.

If memory cards appear in My Computer/Computer (Windows operating systems) or on the

desktop (Mac operating systems) but errors occur when writing or reading, check the

following:

• Make sure that the memory card is fully inserted into the slot.

• Try a different memory card of the same type in the same slot. If the different memory

card works, the original memory card should be replaced.

• Some cards have a read/write security switch. Make sure that the security switch is set

to Write Enabled.

• Make sure that the amount of data you attempted to store has not exceeded the

capacity of the card.

• Inspect the ends of the memory cards for dirt or material closing a hole. Clean the

contacts with a lint-free cloth and small amounts of isopropyl alcohol.

you copy any valued files to a computer before formatting a memory card. Do not

disconnect the card reader or remove the memory card while formatting is in progress.