HIK VISION DS-K4H258S Manual de instrucciones de instalación
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Controlador HIK VISION DS-K4H258S. HIK VISION DS-K4H258S 9 páginas. Magnetic lock connect to access controller
También para HIK VISION DS-K4H258S: Manual del usuario (9 páginas)
Imprimir página
DS-K4H250/450/258 series magnetic lock
Title:
connect to DS-K2600 series Access Controller
Product:
Access Control Device
DS-K4H250/450/258 series magnetic lock connect to DS-
Preparation
Connecting magnetic lock to access controller is mainly applied to swiping card to open the door for
exiting. For magnetic lock and access controller in this document, please check the table below:
Note
This document is simply used to guide users how to wire correctly and ensure access controllers can
control locks.
The access controller model in this document is DS-K2604.
Part 1 is mainly for magnetic lock wiring, and Part 2 and Part 3 are mainly for the situation that users
could get the door status on iVMS-4200 Client.
Notice
1.
Please cut off power supply before wiring;
2.
Please use a tool to screw magnetic lock screws in following picture, and remove the cover of
magnetic lock, find V+/V- and NO/NC & COM interfaces of magnetic lock in following picture;
Version:
K2600 series Access Controller
Magnetic Lock
DS-K4H250S
DS-K4H250D
DS-K4H450D
DS-K4H258S
DS-K4H258D
v1.0
Date:
Page:
1 of 9
Access Controller
DS-K2601
DS-K2602
DS-K2604
01/11/2018