Coram Showers 800 Manual de inicio rápido - Página 2

Navegue en línea o descargue pdf Manual de inicio rápido para Sanitarios Coram Showers 800. Coram Showers 800 8 páginas. Shower enclosure

Imprimir página
Check contents of pack before installation. If anything is
missing, contact our Customer Careline for assistance.
CUSTOMER CARELINE: 01746 713410
PN3230
PN3225
32mm
PN60524
10mm
PN4748
PN50489
PN50488
PN50486
PN50487
1
a
=
100mm
max
a: Drill holes in both wall channels (PN10676) at points shown using a 4.5mm drill bit, through the middle and in the groove.
b: Ensure the shower tray is level in all directions.
IMPORTANT: Clean the tray and seal the gap between the tray surface and tiles. It is important that the tray is sealed right up to
the tray edge so that the bottom of the wall channel is sealed. Failure to do this will cause water to leak under the wall channel
and between the tray and tiles, resulting in damp patches on the wall and under the tray.
2
PN60517
8
Top
wheels
24
PN60518
14
Bottom
wheels
PN60511
6
PN60521
4
PN40260
4
9mm
Flipper
PN40095
12mm
2
Flipper
PN40333
2
PN80564
=
=
ø 4.5
mm
760 RAIL - PN11154
800 RAIL - PN11155
4
4
2
2/2
2
2
PN10676
2
760 RAIL - PN11156
800 RAIL - PN11157
1/1
b
100mm
max
760 RAIL - PN11156
800 RAIL - PN11157
PN10676
760 RAIL - PN11154
800 RAIL - PN11155