Dynojet Power Comander III Instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios para motocicletas Dynojet Power Comander III. Dynojet Power Comander III 4 páginas. 2004-2007 kawasaki
Imprimir página
PCIII USB EX
harness
i215-411EX
squeeze this connector
together to remove
remove this clip
to disconnect
PCIII USB EX
harness
The ignition must be turned OFF before
installation.
1
Remove the seat.
2
Remove the left side cover.
3
Remove the indicator light cluster assembly.
4
Unbolt the fuel tank.
Note: It is not necessary to remove the fuel
tank; however, removing the fuel tank makes
the installation easier. If you remove the tank,
pay attention to the vent hose routing.
Pressing the tabs on the black fuel line
connector will allow the fuel line to be
disconnected as shown in Figure A.
5
Route the wiring harness from the
PCIII USB EX through the hole in the left hand
side tray as shown in Figure B.
6
Route the PCIII USB EX harness under the
frame and towards the throttle bodies as
shown in Figure C.
See Figure D for a close view of the
PCIII USB EX harness.
2004-2007 Kawasaki Mean Streak - PCIII USB EX - 2