Coram Showers OPTIMA PIVOT DOOR Instrucciones - Página 3
Navegue en línea o descargue pdf Instrucciones para Cabinas de ducha Coram Showers OPTIMA PIVOT DOOR. Coram Showers OPTIMA PIVOT DOOR 4 páginas.
Imprimir página4
X
X = Door widths - 700 Door = 650 - 700mm
a: Place wall channels on the tray ensuring they are vertical and a minimum of 3mm back from the front of the tray. Place masking tape against
the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm holes, 30mm deep and insert the wall plugs.
b: Apply sealant to the back of the wall channels. c: Place the wall channels onto the door.
5
32mm
Place the door in position on the tray, fix the wall
channels to the walls using 8 x 32mm screws
and screw caps.
a
ø 6.5
mm
3mm
min
760 Door = 710 - 760mm
●
6
a: Check that the door is centrally positioned and perfectly vertical. Drill inside of the
wall channels using a 3mm drill bit in the two lower positions shown. Fix using 2 x
10mm screws and screw caps.
b: Check the door is vertical, drill the next 4 holes and fix using 4 x 10mm screws
and screw caps.
b
800 Door = 750 - 800mm
●
a
ø 3
mm
10mm
c
900 Door = 850 - 900mm
●
b
ø 3
mm
10mm
3