Adesso NuScan 2100 Series Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Lector de códigos de barras Adesso NuScan 2100 Series. Adesso NuScan 2100 Series 14 páginas.

7. Scanning Mode Selection

Note: The default setting of the barcode scanner is on Trigger Mode.

Do not program the barcode scanner unless necessary.

Start

Trigger Mode (Default)

The scanner becomes inactive as soon as the data is

transmitted. It must be triggered to become active again.

Auto Scan Mode

In auto scan mode, the scanner is still active after the data is

transmitted, but the successive transmission of the same bar

code is not allowed when the trigger switch is pressed again.

Alternate Mode

This scanner will light up when pressing the scanner trigger

switch once. Then the scanner will turn off for the next

pressing.

Repeat Mode

This mode is similar to Auto Scan mode, but duplicate reading

of the same barcode is prohibited if the scanner switch is

pressed.

Reset Mode

The reading of the "RESET" label turns all the parameters

back to default values.

All program setup must start with reading the "Start" label,

and reading the "End of Configuration" label to save any

changes.

Trigger mode

Auto scan mode

Alternate mode

Repeat mode

Reset Mode

End of Configuration