Dynojet Power Commander 3 Instrucciones de instalación - Página 2
Navegue en línea o descargue pdf Instrucciones de instalación para Unidad de control Dynojet Power Commander 3. Dynojet Power Commander 3 3 páginas. 2005 yamaha yzf 600 r6
Imprimir página
Under frame
PCIII harness
i415-411
www.powercommander.com
Remove this plug
PCIII harness
Ground wire from PCIII
1
Remove the main seat and passenger
seat.
2
Lift the front of the fuel tank up and
use something to keep it propped up.
Remove the plug shown in Fig. A
3
Rest the PCIII in tail section
temporarily.
4
Route the connectors from the PCIII
thru the opening in the inner fender
one at a time. Follow along the R.H
side of the subframe. Route harness
under the subframe crossover shown
in Fig. B.
6
Route the harness from the PCIII
under the fuel tank bracket.
7
Attach the ground wire from the PCIII
to the negative side of the battery.
(Fig. C)
2005 Yamaha YZF 600 R6 - PCIII USB - 2