GAMA Electronics RF24V-2-ASL-NIS Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Receptor GAMA Electronics RF24V-2-ASL-NIS. GAMA Electronics RF24V-2-ASL-NIS 4 páginas.

WWW.GAMAINC.COM

All remote-control systems shipped by GAMA Electronics are 100% functionally tested just prior to shipment.

If your RF remote control system does not work out of the box, stops working or functions intermittently please take the

following steps to resolve common issues. Please note that you must be 2-3 feet away from the receiver when operating

the remote control. Operating within 2-3 feet may result in no operation or intermittent operation.

1. Replace the A23 12V Battery in the transmitter

The remote control can activate during shipping and drain the battery that is installed in the control. We

send a replacement battery with the system if this occurs.

2. Check the voltage supply at the receiver

The receiver is designed to function at 10-15VDC. Voltage on the (+) and (-) terminals on the control

should be within this range.

3. Reprogram the remote control

If the system is non-functional try to reprogram the remote control. The program may not have taken

during the programming process or the program button may have been pressed. If the program button is

pressed the memory of the remote controls programed to the receiver are erased.

4. Listen and look for functionality on the receiver.

The LED that is used for programming the system will illuminate when the receiver is activated. You will

also hear a "click" when the internal relays engage. If you can see the LED illuminate and you hear the

relay "click" the issue is most likely in the wiring or device being controlled.

5. Add a long-range antenna

If the receiver is in an area that is averse to the reception of an RF signal, such as near a motor or in a

metal casing, a long-range antenna may solve the issue. Connect the antenna per the instructions on

page 3 and mount the antenna in an exposed area away from any motor.

Troubleshooting

RF24V-2-ASL

Instruction Manual

Page 4 REV A 12/28/17