Dynojet Power Commander III USB EX Instrucciones de instalación - Página 3

Navegue en línea o descargue pdf Instrucciones de instalación para Unidad de control Dynojet Power Commander III USB EX. Dynojet Power Commander III USB EX 4 páginas. 2000-2001 honda
También para Dynojet Power Commander III USB EX: Instrucciones de instalación (3 páginas), Instrucciones de instalación (3 páginas), Instrucciones de instalación (3 páginas), Instrucciones de instalación (3 páginas)

ground wire

PCIII USB EX connectors

i115-411EX

stock connectors

Attach the ground wire from the PCIII USB EX

to the negative side of the battery as shown in

Figure D.

Reinstall the fuel tank stop bracket. Rotate the

fuel tank upwards and hold in this position.

10 Unplug the stock wiring harness connectors

from the throttle bodies as shown in Figure E.

Note: This bike has a set of upper and lower

injectors. Make sure that you connect the

PCIII USB EX to the lower set of injectors at

the throttle bodies.

11 Attach the connectors from the PCIII USB EX to

the stock connectors and the throttle bodies as

shown in Figure F.

Connect the orange PCIII USB EX wires to the

far left cylinder (cylinder #1) and continue to

the right.

2003-2004 Honda CBR600RR - PCIII USB EX - 3