AGS Merlin 1000S Manual de instalación y funcionamiento - Página 6

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Equipos de laboratorio AGS Merlin 1000S. AGS Merlin 1000S 16 páginas. Gas utility isolation controller
También para AGS Merlin 1000S: Manual de uso e instalación (10 páginas), Manual de instalación, uso y mantenimiento (10 páginas), Manual de instalación y funcionamiento (12 páginas)

Installation & Operation Manual

7. FAN SWITCHES

This terminal switches when the key is turned on and off.

This can be connected to a fan switch (supplied separately) which can provide power to fans

when the control panel is switched on.

8. CO2 MONITOR

This terminal can be used to connect a Merlin CO

a high concentration of CO

If no CO2 monitor is connected, the panel will 'beep' upon power up and the CO2 LED will

flash 3 times to indicate that this terminal has been disabled.

An external power supply is required.

Refer to your CO

monitor manual for further information.

9. 12V DC

This is a power output for external auxiliary devices when there is power at the panel and can

be used to create a relay switch with the BMS relay output.

Max output: 50mA

1000S IOM Rev: 07

01-20

monitor to shut off the system in the event of

Merlin 1000S