Jacuzzi 4242N Manual de instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Cabinas de ducha Jacuzzi 4242N. Jacuzzi 4242N 8 páginas. Shower bases
También para Jacuzzi 4242N: Manual de instrucciones de instalación y funcionamiento (16 páginas), Manual de instrucciones de instalación (8 páginas)
Imprimir página
STEP 2. ROUGH-IN PLUMBING
A. Install water lines and rough plumbing. Valve should
be located between 36" and 48" from the floor. Use
blocking and secure with pipe straps.
B. If stationary shower is used, install shower riser.
Suggested shower head location is 78" from the floor
(above the endwall).
C. The locations of the valves, mixers, and shower head
should be determined before the walls are placed in
position. Where access to connections is limited, allow
enough flexibility in the supply lines for easier position-
ing of the valves after the unit is in place.
From stable reference points such as subfloor and
front of the double studs, measure and note the
locations of the valves, shower head arm and connec-
tion for body spray jets.
STEP 3
Install Shower Base per Shower Base Instructions.
A. For proper fit and installation of the custom shower
system it is imperative that the shower base is
level on all sides and the wall structure is plumb.
NOTE: Watertight installation of the drain is the installer's
responsibility. Drain leakage is excluded from the Jacuzzi
Whirlpool Bath warranty of this product. (See "Drain
Installation Instructions" provided with drain.)
SUGGESTED PLUMBING LAYOUT
(REVERSE FOR LEFT HAND SEAT WALL VERSION)
ROUGH-IN PLUMBING DETAILS
BLOCKING
TO
SHOWER HEAD
TO BODY SPRAY
JETS WALL
(IF NEO WALL IS
EQUIPPED
WITH JETS)
OPTICA 300
MIXER AND
TRANSFER
VALVE
12" CLEARANCE
FOR PLUMBING
AT SEATWALL
CENTERLINE
TO SHOWER HEAD OR HAND HELD SHOWER
TO BODY
SPRAY WALL
LINE TO WALL
BAR SHOWER
HEAD OR
TRANSFER
SHOWER
VALVE
HEAD
LINE TO BODY
SPRAY JETS
WALL (IF BACK
WALL IS
EQUIPPED
WITH JETS)
OPTICA 300
MIXER/
HOT IN
TRANSFER
VALVE
HOT
WATER
SUPPLY
COLD
WATER
SUPPLY
SUPPLY LINES
OPTICA 300 CONNECTIONS
MxF ADAPTER (3)
COPPER GASKET (4)
LEFT-HAND
THREAD TO
SWEAT ADAPTER
COPPER PIPE
COLD IN
MIXER VALVE
78"
(FOR FIXED
SHOWER
HEAD)
36" MIN.
48" MAX.
24"