HIKOB GATEWAY H-GW103D-G Manual de instalación - Página 11
Navegue en línea o descargue pdf Manual de instalación para Pasarela HIKOB GATEWAY H-GW103D-G. HIKOB GATEWAY H-GW103D-G 12 páginas.
También para HIKOB GATEWAY H-GW103D-G: Manual de instalación (11 páginas), Manual de inicio rápido (2 páginas)
Imprimir páginaHIKOB GATEWAY
Document version 2017V2-EN
a. Ethernet cable set up for outdoor use
HIKOB provides an industrial connector housing (Amphenol Socapex RJF RB 6, which
is IP67), to be mounted on the Ethernet cable before connecting it to the HIKOB
GATEWAY. This is a protective sealed and hardened envelope which can be added around
any standard RJ45 connector. Choose an Ethernet cable suitable for outdoor use. You
don't need tools to equip your Ethernet cable, just follow these step by step graphical
instructions:
Figure 3 – : Steps to dress the Ethernet cable with the Amphenol connector housing
Pull a Cat.5e Ethernet cable from your electrical cabinet, not going further than 100m long,
to ensure data rate quality. Don't connect it while you're doing the installation.
Mount the Amphenol Socapex on the end of the cable that goes to the HIKOB GATEWAY
Plug this set up connector to the female Ethernet connector on the back of the HIKOB
GATEWAY.
b. HIKOB GATEWAY arm's mounting process
The HIKOB GATEWAY is delivered ready to be installed. HIKOB highly recommends using
®
RAM MOUNTS
products that can be optionally purchased with your HIKOB GATEWAY,
ask your vendor. This is a set of 3 elements:
2017 · Page 11/12