Gama Sonic GS-122PIR Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Luz exterior Gama Sonic GS-122PIR. Gama Sonic GS-122PIR 4 páginas.

Solar Lamp Location:

For optimum light duration throughout the night, it is very important to place the solar panel in a spot

where it will receive the maximum amount of direct sunlight throughout the day. Also, for best results

install your solar panel facing the south.

NOTE: The Light fixture is for OUTDOOR USE only and will not work properly indoor because

Installation Instructions (Fig. 1)

1. Install the solar panel using the 2 screws provided no more than 6ft from the light

fixture. Refer to the "solar lamp location" paragraph before choosing the installation

location.

2. Use an electric drill to make two holes in the wall, place provided anchors into holes,

place the wall bracket in line with the holes and secure the solar panel with the

provided screws.

Assemble the light fixture into the wall bracket using the provided screws.

4. Connect the wire from the light fixture to the solar panel.

Operation Instructions

1. Remove the round glass cover by turning it counterclockwise (Fig. 2)

Turn the operation switch (Fig. 3) to the ON (|) position. Light will turn on automatically at

dusk and will be brighter when motion is detected. The Light

duration when Motion sensor is activated is about 45

Seconds and then returns to a normal mode.

3. Reattach the round glass cover by turning it clockwise.

Fig. 3

of the PIR sensor module.

DO NOT INSTALL THE LIGHT INDOOR!

Fig. 1