adesto SM2400-EVK2 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Adaptador adesto SM2400-EVK2. adesto SM2400-EVK2 16 páginas. Serial-2-plc adapter

3. Once the terminal.exe program is invoked, connect the EVK to the terminal via the right COM port at a default baud

rate of 115200 as shown in Figure 8.

4. When running the ASCII PASSTHRU project for the first time on the board, which had other projects loaded before, it is

important to run AT&F command followed by ATZ command. This is needed to write ASCII-specific default settings to

flash.

5. Send ATO to switch to data mode.

6. Repeat steps 2 through 4 for the second SM2400-EVK2.

7. Test any ASCII string from one terminal and it should be received and displayed on the 2nd terminal as shown in

Figure 9.

Set the Baud Rate to 115200

Figure 8.

SM2400 Serial-to-PLC Adapter User's Guide

UG-SM2400–-177A–-02/2019