Gama Sonic GS-80 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de iluminación Gama Sonic GS-80. Gama Sonic GS-80 17 páginas. Solar charged address light
También para Gama Sonic GS-80: Manual de instrucciones (3 páginas)
Imprimir páginaAssembly Instructions
Ground Mounting
1.
Assemble the mounting poles (B1, B2) and Stake (C);
(as shown in fig.5).
Note: There are 2 optional heights to use for your
convenience.
2.
Slide the body unit (A) into the upper part (B1) using
the 2 joints (J) provided.
3.
Carefully insert the stakes into the ground where
desired.
NOTE: If the ground is hard and packed, moisten the
ground with water before inserting the stake (to avoid
breakage). Use a rubber mallet (not included), if
necessary, to gently tap stake into ground.
Wall mounting
1.
Take out the 2 round parts (R) located
on the sides of the body unit.
2.
Fix the unit to the wall using the screws
and anchors provided
(as shown in fig.6).
Operation
Adjust the switch located on the backside of the
unit to "AUTO" position (as shown in fig. 7)
NOTE: The solar address light must be charged
for two sunny days for best results.
Figure 5
Figure 6
Figure 7
4