Gama Sonic GS-203-WW Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Luz de inundación Gama Sonic GS-203-WW. Gama Sonic GS-203-WW 6 páginas. Solar flood light

Imprimir página

Our GS-203 model boasts multiple installation options. These instructions will

explain how to assemble the different pieces to each other. Please use this as a

guide and choose the mounting option/combination that works best for your

situation.

Step 1. Mounting Bases to lamp and/or solar panel

This product comes with two stake mounts (Part D) and one flat mount (part E).

Choose the one(s) that fit best for your desired mounting location.

6. If using Part D, firmly insert the stake into the ground of the

Fig. 1

1. Attach Part A to Part D or E (Fig. 1) and secure by screwing

Part H clockwise into the threaded section.

2. Next, Part A can be attached to Part F (Fig. 2) or G (Fig. 3) by

sliding the tapered end of the wedge into the groove at the

bottom of the lamp or solar panel. NOTE: Push the part into the

groove firmly so it does not easily slide out.

3. You can adjust the angle of the completed assembly by

loosening the screw (Part H) and tilting the product to the

desired angle. Re-tighten Part H to secure product in the new

position.

4. If you plan to attach one of the mounting bases to both the

lamp and solar panel, repeat steps 1-3 to have a mount for each

of Part F and G.

5. If using Part E, drill two holes into your mounting location

using the base as a template. Secure the base using the

hardware in the package (Part J)

desired location.

Fig. 2

Fig. 3