Deaf Bonce Hannibal Series Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Altavoces Deaf Bonce Hannibal Series. Deaf Bonce Hannibal Series 16 páginas. Mid-range speakers
También para Deaf Bonce Hannibal Series: Manual del usuario (16 páginas), Manual del usuario (16 páginas), Manual del usuario (16 páginas), Manual del usuario (16 páginas), Manual del usuario (16 páginas)
Imprimir página
M i x e d c o n n e c t i o n o f t h e s p e a k e r s
S e l e c t i o n o f t h e d i a m e t e r o f s p e a k e r c a b l e s
Use the table below to select the desired diameter based on the length and the power consumption.
4 . F I L T E R I N G , R E C O M M E N D E D A M P L I F I E R S E T T I N G S
The correct choice of amplifier, its settings, filtering and enclosure largely influence on the lifespan of your audio system. You
should select an amplifier with a nominal power, not exceeding the nominal power of the speakers. Proper coordination of the
head unit (HU) with the amplifier will allow to get a clean, undistorted signal applied to the component to prevent overheating
and voice coil damage. Recommended settings of the amplifier and HU: Volume of HU should not exceed 80%. The amplifier
sensitivity should be set to 50%.
The recommended filter settings:
The high pass filter HPF (the filter that cuts all frequencies below those set for the filter) should be set to 150-250 Hz
(24 dB/Oct), or 250-350 Hz (12 dB/Oct)
The low pass filter LPF (the filter that cuts all frequencies above those set for the filter) should be set to 8-10 kHz (12
dB/Oct)
Recommended amplifiers: AAK-OGO2500.1D, AAK-OGO1500.2D, AAK-180.4, AAK-200.4D, AAK-201.4D, MA-150.4,
MA-130.4, MA-80.4, MA-50.4.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
4 Ohm х 4
5
EN
4 Ohm