Jadever 1.5K Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Scales Jadever 1.5K. Jadever 1.5K 14 páginas.

Imprimir página

desired one .

UNIT/LO

3) Press key

MODE

4) Press key

Description of Parameter Values

1) P00 Set the period of inactivity before the scale automatically turns off. Options are

the period of inactivity before the scale automatically turns off. Options are

Aut.NO=non power-off, Aut.5, Aut.10,

2) P01 Set Check Weighing buzzer beep. Options are

P01 Set Check Weighing buzzer beep. Options are B-UP,B-in ,B-out and b

There will be a warning sound when the material's weight exceeds the preset upper

limit .

There will be a warning sound when the material's weight is between the upper and

lower limits.

There will be a warning sound when the material's weight exceeds t

There will be a warning sound when the material's weight exceeds the preset upper

and lower limits and the exceeding weight is more than 20 scale

and lower limits and the exceeding weight is more than 20 scale divisions.

There will be a warning sound when the material's weight is under the preset lower

limit and the weight is less than 20 scale

limit and the weight is less than 20 scale divisions.

3) P02 Set the desired external devices .Options are PC,SH

ZEBRA.

= Computer output;

= SH-24 printer output (dot

=BP545D printer output (Automatic-sticking), paper size: 5cm*3cm.

=BP545D printer output (Automatic

=Godex printer output (Automatic-sticking), paper size: 5cm*3cm.

=Godex printer output (Automatic

=ZEBRA printer output (Automatic

=ZEBRA printer output (Automatic-sticking), paper size: 5cm*3cm.

4) P03 Set RS-232 Serial Transmission Rate. Options are bA

232 Serial Transmission Rate. Options are bA-96(9600),BA48(4800) and

BA24(2400).

5) P04 Set Checkweighing value in memory or

P04 Set Checkweighing value in memory or not.

= Previously set checkweighing values are not retained when the unit is turned

= Previously set checkweighing values are not reta

= Previously set checkweighing values are retained when the unit is turned on.

= Previously set checkweighing values are retained when the unit is turned

6) P05 Set Parity check.

PRINT/HI

or key

to set the content values of setting items.

to save the settings and go back to the weighing

to save the settings and go back to the weighing mode.

Aut.10, Aut.30 , Aut.60 and Aut.90 (minutes).

nal devices .Options are PC,SH-24，BP545D , Godex and

(dot-matrix)

Vetek Weighing AB

Vetek

mode.

b-low

he preset upper

BP545D , Godex and

96(9600),BA48(4800) and

ined when the unit is turned on.