Cordex TOUGHPIX DIGITHERM Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Cámaras térmicas Cordex TOUGHPIX DIGITHERM. Cordex TOUGHPIX DIGITHERM 9 páginas. Digital imaging camera
También para Cordex TOUGHPIX DIGITHERM: Manual del usuario (9 páginas), Manual del usuario (11 páginas)
Imprimir páginaWEB BROWSER OPERATION
The integrated DIGITHERM web browser enables display and download of
on-camera images in the original view-mode via the DIGITHERM's WIFI
access point.
Basic Operation
The web browser displays thumbnail images for quick transfer with download
access to the full resolution images. Once downloaded, images can be viewed
and processed in CONNECT Software to adjust the view mode.
•
WIFI: Web server enables fast application
and browser access to display images.
•
Image view mode displayed on web-
server shows captured images including
colour bar and temperature scale.
•
Active BOX or SPOTS and temperature
min/max locations are displayed without
temperatures. The colour bar can be used
to get the approximate temperature for
these locations.
•
Direct linked full resolution downloads
available as shown in the example.
RIGHT CLICK: the link to download the
VISIBLE or IR image.
LEFT CLICK: to open full resolution image.
Note: the IR and VISIBLE are not completely aligned in the browser views.
Please note
•
Both VISIBLE and IR images are required for full analysis in CONNECT and these
need to be downloaded separately.
RUGGED
AUTHORITY
Find Quality Products Online at:
BATTERY PACK
Removing the Battery Pack
•
Open the Battery Pack door of the camera with the supplied access key.
•
Remove the Battery Pack from the camera.
Inserting the Battery Pack
•
Open the Battery Pack door of the camera with the supplied access key.
•
Slide the Battery Pack into the camera.
•
Secure the Battery Pack in place using the supplied access key.
•
Ensure the access door is securely closed before entering any restricted areas.
Charging the Battery Pack
•
Plug the charger into a wall socket/outlet. The GREEN LED will illuminate
showing mains power is connected and that the charger is ready.
•
Insert DIGITHERM Battery Pack into the charging station. Care must be taken to
ensure that the battery is inserted in the correct orientation, otherwise battery
or charger damage may occur.
•
If the battery is properly located in the charging station, the RED LED on the
charger will illuminate to indicate charging. Once the charge cycle is complete,
the LED will change to GREEN.
GlobalTestSupply
www.
.com
TOUGHPIX DIGITHERM – User Manual
Document Reference CDX8950-507 Rev. B
17