Gamber Johnson Getac S400 Instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Instrucciones de instalación para Estación de acoplamiento Gamber Johnson Getac S400. Gamber Johnson Getac S400 5 páginas.
Imprimir página
Inserting the computer into Docking Station
1.
Make sure the Sliding Door (located on
the underside of the computer) has
been opened, exposing the computer's
docking connector. (see Figure 2)
2.
Make sure that the docking station Latch
is in the open positon before inserting
computer. With the computer held at an
angle insert the front edge of the handle
under the front tabs. (see Figure 3).
3.
Finish by setting the back of the
computer onto the dock so that it is flat.
Press the latch until it is fully engaged
and remains closed. (see Figure 4)
4.
To remove computer make sure
computer is turned off and reverse
procedure above.
Sliding Door
Latch
Figure 2
Figure 3
Figure 4
Page 3 of 5