Mainstreet Equipment 541EC2D Manual del usuario - Página 11
Navegue en línea o descargue pdf Manual del usuario para Horno Mainstreet Equipment 541EC2D. Mainstreet Equipment 541EC2D 12 páginas. Electric convection ovens
Imprimir página
User Manual
HIGH TEMPERATURE RESET :
WARNING: PLEASE UNPLUG AND DISCONNECT UNIT BEFORE REMOVING THE BOLT AND OPENING THE
CONTROL PANEL TO AVOID INJURY.
1. Remove the 7mm bolt that secures the control
panel. (Fig. 1/2)
2. Open the control panel by carefully pulling down,
lowering it from the top. (Fig. 3)
3. Reset the temperature limiter. The temperature
limiter is installed on a small bracket behind
the control panel (Fig. 4). Press the reset button
manually. The unit will operate under the new
settings once powered on.
4. Close the control panel and re-install the 7mm bolt
to secure.
5. Power the unit on for inspection.
WARNINGS !
1. Always ensure proper supervision while the
equipment is in use.
2. Simple adjustments to knobs, leg height, etc. do
not require assistance from specialized personnel. For more technical adjustments, please consult a
qualified technician.
3. Use only parts and accessories recommended by Mainstreet Equipment.
4. During the initial uses of the equipment, an acrid or burning smell may be detected. This will disappear after
two or three uses. Or set unit to 450-500°F for 30 min. or until smell starts to disappear, then turn unit off and
let cool.
5. The equipment will remain hot for a short time after use (residual heat). Avoid all physical contact with the unit
during this time to prevent injury.
6. This equipment is strictly for professional use and must be used by qualified personnel.
7. The installation, startup, and maintenance of this equipment must be carried out by a qualified technician.
8. All installation must be carried out according to the law. Mainstreet Equipment is not responsible for damages
due to an incorrect installation, improper maintenance, or incorrect use.
NOTE: These are very important regulations; if they are neglected, the equipment may not perform
properly or the user may be placed at risk and void manufacturer warranty.
Mainstreet Equipment
11