AGT INDUSTRIAL AGT-WB24 Manual del producto - Página 15

Navegue en línea o descargue pdf Manual del producto para Equilibradoras de ruedas AGT INDUSTRIAL AGT-WB24. AGT INDUSTRIAL AGT-WB24 18 páginas.

Imprimir página
6
Distance ruler calibration optional function No automatic gauge, no calibration
required.
Pull out the ruler to zero position and press
Pull out the ruler to 15 position and press
7.diameter ruler calibration
required.
7 ．1 install a tire and input the diameter by
+
Pull out the ruler to the rim of the tire and
hold it
Then press
key to confirm ，which
is indicating finished
SIX. Trouble description
★
When the machine shows the following faults, you should perform self- fault diagnosis and replace the damaged parts in
time to ensure safe use
！
No.
Screen displayed
1
2
+
key to confirm
key to confirm
Self-calibration is successful！
optional function
(for example,if it is 14 inch ，then in put 14)
display
＞
operate
＞
display
＞
Self-calibration is successful!
Reasons
1 ．No rotation.
2 ．With rotation.
1 ．Tire is no fastened.
2 ．Position sensor.
display
＞
display
＞
display
＞
No automatic gauge, no calibration
1．Check or replace the power panel.
2 ． Check or replace the position
sensor or computer panel.
3. Adjust holder of photoelectric
panel
1 ． Fasten the tire.
2. Check or replace position sensor.
Solutions
15