GAME CHANGER AUDIO THIRD MAN PLASMA Coil Manual de inicio rápido - Página 2
Navegue en línea o descargue pdf Manual de inicio rápido para Pedal de música GAME CHANGER AUDIO THIRD MAN PLASMA Coil. GAME CHANGER AUDIO THIRD MAN PLASMA Coil 2 páginas. Distortion unit
Imprimir página
EFFECT KNOB
SUBHARMONIC
MODE 2
SUBHARMONIC
MODE 1
VOLTAGE
BOOSTER
SUBHARMONICS:
The PLASMA COIL's subharmonics are produced by modulating the
Xenon tube's Voltage with multiple divisions of the instruments
fundamental frequency. The result is a glitchy, distorted octave-down
sound that is somewhere between a ring-mod and a bit-crush effect.
UPPER HARMONICS:
The PLASMA COIL's upper harmonics are produced by using a full-wave
rectifier and band-pass filter. The result is an octa-fuzz type sound
with a distinct 2nd harmonic enhancement which is perceived as an
octave up effect.
EQ section that allows you to shape and mold
your tone - these controls are very wide and
can be used to achieve extreme settings.
Momentary or latching footswitch
that activates the PLASMA COIL'S
special effect (middle knob).
TECHNICAL SPECIFICATIONS
Input Type
Input Impedance
Max Input Level
Output Type
Output Impedance
Max Output Level
Power Connector
Frequency Response
EQ LOW FRQ Boost/Cut
EQ HI FREQ Boost/Cut
Indicator
Connectors
Power Requirements
Peak Power Consumption
Mean Power Consumption
Power Consumption during
Standby
Dimensions (l*w*h)
Weight
WARRANTY & RETURNS
You have a 30 day return period when you may return the product and receive a full
refund. You will only be responsible for return shipping charges.
Each PLASMA Pedal manufactured by Gamechanger Audio and distributed by Third Man
Records is warranted to be free from defects in materials and workmanship for one
year from the date of shipping or longer if required by the relevant legislation.
This warranty shall not apply to any unit which in the opinion of the manufacturer
has been used improperly or has been mechanically or otherwise damaged by
accident, misuse or negligence or has been altered or repaired in such a way to
impair performance, nor shall it apply to cosmetic defects (considered normal wear
and tear)
Other parts, such as knobs, rubbers, cable connectors, are non replaceable. The
manufacturer reserves the right to make changes in design or construction of this
equipment without obligation to install similar changes in equipment already sold.
UPPER HARMONIC
MODE
MIXED HARMONIC
MODE 1
MIXED HARMONIC
MODE 2
Back panel toggle adjusts
the effect switch from
latching to momentary.
1/4'' Unbalanced TS
1MΩ
7Vpp (+10dBu)
1/4'' Unbalanced TS
100Ω
7Vpp (+10dBu)
Center negative
2.1 x 5.5 mm barrel plug
(the standard 9V)
20Hz to 22kHz
±9dB, 600Hz corner freq.
±10dB, 1.5kHz corner freq.
Check indicator white LED
IN, OUT, DC input
300mA, 9VDC
2.7 W
1 W
0.025 W
148mm*96mm*70mm
840 g / 1.8 lbs
OTHER EFFECTS
We encourage you to experiment using the PLASMA COIL together with
tremolo and delay based effects. By putting a hard tremolo in front of the
PLASMA COIL you will achieve a satisfying flicker that sounds fantastic.
This also goes for arpeggiators and other rhythm-based effects.
By setting up a delay unit before the PLASMA COIL you will get a wide
variety of break-up sounds, as the delay's trails begin to get softer.
There is a lot of room for experimentation, when it comes to combining
PLASMA Coil with other drive and distortion effects - When PLASMA Pedal is
placed before other drive and distortion pedals the noise-gating effect is
transferred to the rest of the signal-chain, and you can achieve very
explosive flavors of distortion.
PLASMA COIL sounds great without reverb. That way the noise-gating effect
is very pronounced and you get total silences between notes.
Although primarly designed for guitarists, PLASMA Coil is also a great
distortion for synth and bass players - the low-end is massive and the
high-end sizzle cuts trough anything.
It can also be used to crush a snare or kick drum, or even a whole beat.
For studio use - please make sure that the input signal is INSTRUMENT LEVEL.
WARNING!
The PLASMA COIL DOES NOT support 9V batteries, and it should always be
powered with a standard 9V DC guitar pedal power supply with a center
negative connector (OneSpot, Boss, Snark, etc.).
NEVER operate the PLASMA COIL near water or on outdoor stages in rainy
conditions. DO NOT play your PLASMA COIL in the shower!
The XENON Tube contained within the PLASMA COIL will run an estimated
10 000 hours - In case of a broken tube or a faulty unit, please contact your
PLASMA COIL Dealer or [email protected]. For all other inquiries,
please reach out to Gamechanger Audio or Third Man Records.
Gamechanger Audio and Thrid Man Records will not be liable for any injury,
material damage, or any other loss, caused by the incorrect operation of
PLASMA COIL, or breach of the warnings and instructions laid out in this
manual.
FOR THE US:
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. this equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with these instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- connect equipment into an outlet or a circuit different from that to which the
receiver is connected.
- consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Unauthorized changes or modification to the system can void the users Authority to
operate this equipment. this equipment require shielded interface cables in order to
meet FCC Class B limit.
FOR EUROPE:
This product complies with the requirements of Electromagnetic Compatibility
Directive 2014 / 30 / EU.
FOR CANADA:
NOTICE: This class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations
AVIS: cet appareil numérique de la classe B respecte tout les exigences du
règlement sur le matériel brouilleur du Canada.
TIPS
MANUFACTURER ADDRESS:
GAMECHANGER AUDIO
AISTERES STREET 6
RIGA, LATVIA
WWW.GAMECHANGERAUDIO.COM
+1 202 407 9741
LV-1007