Jaeger-leCoultre Master CoMpressor extreMe W-alarM Manual de introducción - Página 4
Navegue en línea o descargue pdf Manual de introducción para Ver Jaeger-leCoultre Master CoMpressor extreMe W-alarM. Jaeger-leCoultre Master CoMpressor extreMe W-alarM 8 páginas.
Imprimir página
Use
Starting the watch
Crown B
Turn the compression key to the "open" position in the direc-
tion of the arrow. Crown B is then in position 1.
A few clockwise turns of the crown are enough to set the
watch running. It is then automatically wound when you wear
it. Please note that the crown does not lock on winding, even
when the watch is fully wound.
When the operation is completed, turn the compression key
to the "closed" position in the direction of the arrows.
Note on crown A : in position 2, two operations are pos-
sible :
- Turn clockwise : adjusts the date in increasing order.
- Turn counter-clockwise : sets the alarm time.
Time setting
Crown B
Turn the compression key to the "open" position in the direc-
tion of the arrow.
Then pull crown B out to position 2.
Move the hands forward until the desired time, making sure
to move them past 12 o'clock if making this setting in the
afternoon.
When the operation is completed, push crown B back into
position 1 and turn the compression key to the "closed" posi-
tion in the direction of the arrows.
Setting the date
Crown A
Turn the compression key to the "open" position in the direc-
tion of the arrow.
Then pull crown A out to position 2.
Move the date forward by turning the crown clockwise. Per-
form the required number of turns until the desired date is
displayed.
For months with fewer than 31 days, follow the same proce-
dure to move forward to the 1
of the next month.
st
When the operation is completed, push crown A back into
position 1 and turn the compression key to the "closed" posi-
tion in the direction of the arrows.
Setting the alarm
Winding
Crown A
Turn the compression key to the "open" position in the direc-
tion of the arrow. The crown is then in position 1.
Winding is performed by turning the crown clockwise. The
watch is fully wound when the crown locks.
When the operation is completed, turn the compression key
to the "closed" position in the direction of the arrows.
Setting the time
Crown A
Turn the compression key to the "open" position in the direc-
tion of the arrow.
Then pull crown A out to position 2.
M
C
e
W-a
- English
aster
oMpressor
xtreMe
larM
This operation actuates both the alarm mobile
discs simultaneously - the hour and minute discs -
and displays the desired alarm time below the refer-
ence bar at 9 o'clock.
The hour disc indicates the hours from 1 to 12.
The minute disc has a 5 by 5-minute graduated scale for each
hour, with the quarter-hours identified by numerals.
Hour disc (1 to 12)
To set the alarm time, turn the crown counter-clockwise until
the time when you want it to ring (displayed on the simulta-
neous mobile discs) is displayed below the reference bar at
9 o'clock.
When the operation is completed, push crown A back to po-
sition 1 and turn the compression key to the "closed" position
in the direction of the arrows.
Once the alarm has been activated using the procedure
below, it will sound when the alarm display time next comes
up on the watch (every 12 hours if you wind the alarm up
again).
Starting and stopping the alarm
The Master Compressor Extreme W-Alarm watch is equipped
with a double push-button for activating or deactivating the
alarm function. This double push-button is at 10 o'clock, either
side of crown C (which moves the city disc for the world time
function, explained below).
Upper part
'ON'
Lower part
'OFF'
- To activate the alarm, press the upper part of the push-but-
ton. The alarm will sound whenever the desired time comes
up on the watch, i.e. every 12 hours if you wind up the alarm
again.
- To deactivate the alarm, press the lower part of the push-
button. This position disables the alarm chime.
- The chime may be stopped at any time by pressing the
lower part of the push-button. This operation stops the
chime and simultaneously deactivates the alarm function.
Alarm activated position
Upper part engaged
'ON'
Reference bar
Minute disc
Alarm deactivated position
Lower part engaged
'OFF'
4/8