Jafar 4499 Manual de funcionamiento y mantenimiento - Página 9

Navegue en línea o descargue pdf Manual de funcionamiento y mantenimiento para Unidad de control Jafar 4499. Jafar 4499 10 páginas. Return butterfly valves double eccentric

Imprimir página

- product type

3 PROTECTION, STORAGE & TRANSPORT

3.1 PROTECTIVE COATINGS

All internal and external cast iron surfaces are secured with epoxy paint applied electrostatically. The paint is

approved for contact with food products.

The anti-corrosion coat layer thickness is min. 250 µm.

The casting surface is pre-treated for epoxy coating in accordance with the relevant technical documentation and

PN-EN ISO 12944-5:2009.

3.2 PACKAGING

Butterfly valves are packed on EURO pallets (1200x800) and secured with shrink-wrap film hoods.

3.3 STORAGE

Butterfly valves should be stored indoors.

3.4 TRANSPORT

Butterfly valves must be transported by covered means of transport. Prior to transport, butterfly valves are

secured against weather conditions with a protective coat. They are correctly preserved and lubricated and the

closing component is set in its closed position. Depending on the diameter, such valves are transported

collectively in crates or single packages or on special purpose stands. If transported on stands, they have inlet and

outlet protection. Butterfly valves should be transported by covered means and stored indoors. During the

assembly of pipeline butterfly valves for the purpose of preparing them for being transported with lifting

equipment, use: transport holders DN 250 – 800 (Fig. 5). Mounting by the pivot on the lever side is not

acceptable.

Fig.5

OPERATION AND MAINTENANCE MANUAL

01-2016