Jaga BRIZA 055 Manual de instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Calentador Jaga BRIZA 055. Jaga BRIZA 055 12 páginas. Briza ceiling
También para Jaga BRIZA 055: Manual (16 páginas), Instrucciones de montaje (12 páginas)
Imprimir página
1
• the installation must only be carried out by skilled technicians,
qualified for working on air conditioning and cooling systems. In-
correct installation could cause the unit to run badly, with a con-
sequent deterioration in performance.
1
Disassemble the casing
a
Remove the grille.
b
Remove the screws above and below the unit.
c
Remove the casing.
8
BRIZA EC
E / 27200.23700029 - 7 september 2016 3:49 PM - Jaga N.V.
Installation instructions
• the unit must be installed according to national or local standards
in force at the time of installation
• the unit must remain accessible for maintenance
• always use personal protective equipment
Disconnect the grille security
Only for ceiling surface mounted:
• unscrew the grille security
• slide the clamp plates to the outer side of the grille
Further technical installation and connection (s) is identical for all
Briza Built-In and Surface units.
• respect the free space around the unit as shown in the manual
• insulate the valves and connections and pipes with 10 mm thick
anti-condensation material or install the auxiliary pans
• keep a slight tilt towards the condensate drain to help the water
drain
2
Installation guidelines
• mark the fastening points on the wall or ceiling using those on the
unit or according to the dimensions specified in this guide.
• the type of wall determines what type of screw or plug should be
used
a
OPTION →