HIKVISION D8T Series Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION D8T Series. HIKVISION D8T Series 17 páginas. Turbo hd turret camera
También para HIKVISION D8T Series: Manual del usuario (17 páginas), Manual del usuario (17 páginas), Manual del usuario (12 páginas), Manual del usuario (16 páginas), Manual del usuario (15 páginas), Manual del usuario (12 páginas), Manual del usuario (17 páginas)

2 Installation

Before you start:

Make sure that the device in the package is in good



condition and all the assembly parts are included.

Make sure that all the related equipment is power-off



during the installation.

Check the specification of the products for the



installation environment.

Check whether the power supply is matched with



your required output to avoid damage.

Make sure the wall is strong enough to withstand



three times the weight of the camera and the

mounting.

If the wall is cement, insert expansion screws before



installing the camera. If the wall is wooden, use

self-tapping screw to secure the camera.

If the product does not function properly, contact



your dealer or the nearest service center. Do NOT

disassemble the camera for repair or maintenance by

yourself.

2.1 Ceiling Mounting of Type I Camera

Before you start:

Both wall mounting and ceiling mounting are suitable

for the dome camera. Ceiling mounting will be taken as

an example in this section. And you can take steps of

ceiling mounting as a reference for wall mounting.

Steps:

1. Paste the drill template to the celling.

2. Drill screw holes and the cable hole (optional) on

the ceiling according to the supplied drill template.

Note:

Drill the cable hole (hole A) when adopting the wall

outlet to route the cable.

3. Loosen the screws on the bubble of the dome

camera to remove the bubble.

4. Secure the back box on the ceiling/wall with four

PA4 × 25 screws.

Figure 2-1 The Drill Template

Figure 2-2 Remove the Bubble