HIKVISION D8T Series Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Cámara de seguridad HIKVISION D8T Series. HIKVISION D8T Series 15 páginas. Turbo hd turret camera
También para HIKVISION D8T Series: Manual del usuario (17 páginas), Manual del usuario (17 páginas), Manual del usuario (17 páginas), Manual del usuario (12 páginas), Manual del usuario (16 páginas), Manual del usuario (12 páginas), Manual del usuario (17 páginas)

Imprimir página

Connect the corresponding power cord, and video

cable.

Power on the camera to check whether the image

on the monitor is gotten from the optimum angle. If

not, adjust the camera according to the figure below

to get an optimum angle.

Rotation Position

[0° to 360°]

1). Loosen the P screw to adjust the pan position [0°

to 360°]. Tighten the screw after completing the

adjustment.

2). Loosen the T screw to adjust the tilt position [0°

to 180°]. Tighten the screw after completing the

adjustment.

3). Loosen the R screw and rotate the camera [0° to

360°]. Tighten the screw after completing the

adjustment.

2.1.2 Ceiling/Wall Mounting with Junction Box

Before you start:

You need to purchase a junction box separately.

Steps:

1. Paste the drill template on the ceiling/wall.

2. Drill screw holes and the cable hole in the

ceiling/wall according to the holes of the drill

template.

Figure 2-4

3. Take apart the junction box, and align the screw

holes of the bullet camera with those on the

Junction box' cover.

4. Fix the camera on the junction box's cover with

supplied screws.

Fix the Camera on the Junction Box's Cover

Figure 2-5

5. Attach the junction box body to the ceiling/wall by

aligning the screw holes of the junction box.

3-axis Adjustment

Figure 2-3

Drill Template of Junction Box

Pan Position

[0° to 360°]

P Screw

Tilt Position

[0° to 180°]

T Screw

R Screw

Junction

Box Cover