Maiwe MISCOM8028G-4XGF-8GC-16GT Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Interruptor Maiwe MISCOM8028G-4XGF-8GC-16GT. Maiwe MISCOM8028G-4XGF-8GC-16GT 7 páginas. Industrial ethernet switch
Imprimir página
[Device connection]
Step 1 Connect one end of the ground wire to a suitable position, and fix
the ground plate on the switch panel with washers and screws.
Step 2 Connect the power cord to the switch's power terminals.
Step 3 Connect the network cable to the RJ45 port of the switch.
Step 4 Insert the SFP optical module into the SFP port and connect the
fiber-to-fiber transceiver.
5
Log in WEB Page
The device supports WEB management and configuration. The computer can
access the device through the Ethernet interface, and log in to the main
interface of the WEB server through the browser.
Configure the IP addresses of the computer and the device in the same
network segment and ensure that the computer and device can access
each other.
Enter the IP address of the device in the address bar of the computer
browser, the default IP address is 192.168.16.253.
Enter the user name and password of the device in the login page
Click the "OK" button to log in the WEB interface of the device.
6
Specifications
MISCOM8028GX-4XGF-16GF-8GC/
MISCOM8028G-4XGF-8GC-16GT
Switch properties
Bandwidth
Cache size
MAC table
Interface
Gigabit SFP port
10G SFP port
10/100/1000M
TX port
Full-duplex/half-duplex adaptive, supports MDI/MDI-X adaptive
MISCOM8028G-4GF-8GC-16GT/
MISCOM8028GX-20GF-8GC
128Gbps
3Mbit
16K
1000Base-LX
SFP slot
1G/10G
SFP+ interface
10/100/1000Base-TX RJ45 ports