Jaga RDG160 Instrucciones de uso
Navegue en línea o descargue pdf Instrucciones de uso para Termostato Jaga RDG160. Jaga RDG160 2 páginas. Jaga room regulator with lcd screen
Imprimir páginaRoom regulator with LCD screen
Control + Thermostat_control per room
/
Operating Instructions
RDG100/110/140/160
RDG – the electronic room thermostat that allows
thermostat satis es your individual needs in a
ll operating modes: Comfort, Energy Saving and
Protection. The fan operates either in Automatic mo
mode. You can either rely on the factory settings or make adjustments that suit your individual needs.
Main display
Room temperature in
degrees Celsius
Room temperature in
degrees Fahrenheit
Button lock active
Alert indicator
Condensation in the
room
Temporary timer
function active
Additional user
information
Operating mode
button
Fan mode button
Rotary knob
Changing the room temperature
•
The room temperature setpoint can be adjusted with the rotary knob when
Comfort mode
is active
•
Turn the rotary knob clockwise (+) to increase, or counterclockwise (-) to
decrease the current room temperature setpoint for Comfort mode
The setting range is from 5...40 °C, unless limited by parameters P09 and P10 (for parameter
settings, see reverse side).
Adjusting the fan speed
•
Press the fan mode button until the desired fan mode is reached
•
In Automatic mode
, the fan speed is automatically selected by the
thermostat depending on the setpoint an d the actual room temperature. When
the room temperature reaches the setpoint, the fan keeps running at low speed
(factory setting)
•
In Manual mode, the fan operates independently and always runs at the same
speed: Low / medium / high
Note:
If desired, you can change the fan mode selector option via P03: Manually only, or manually including
Protection mode.
you to set the ideal room temperature you want. The
de or at the selected speed when using Manual
Operating mode
Room
Heating mode
temperature
Electrical heater
on
Cooling mode
Comfort mode
Energy Saving
mode
Protection mode:
Protection
against frost
Indicator for
selecting mode
Fan mode
Automatically
Manually:
Low / medium / high
the room temperature reaches the setpoint, the fan keeps running at low speed
(factory setting)
•
In Manual mode, the fan operates independently and always runs at the same
speed: Low / medium / high
CODE: 8751.050006
Note:
If desired, you can change the fan mode selector option via P03: Manually only, or manually including
Protection mode.
Selecting Comfort mode
•
Press the operating mode button until symbol
Comfort mode is selected
•
In Comfort mode, the thermostat maintains the setpoint which can be readjusted
with the rotary knob
Selecting Protection mode
•
Press the operating mode button until symbol
Protection mode is selected
•
In Protection mode, the plant stops operating. If the room temperature falls
below 8 °C, heating is switched on however to protect the room against frost
The setpoints for Protection mode can be ch anged by your HVAC installer if desired:
Changes made by installer:
Frost protection: ____________
Selecting Energy Saving mode
In Energy Saving mode, the room temperature is main
energy and money.
•
When selecting Energy Saving mode, make sure that parameter P02 is set to 2
•
Press the operating mode button until symbol
•
You can change the preselected setpoint by adjusting parameters P11 and P12
(for parameter settings, see reverse side)
Important: The setpoint for Energy Saving mode can
deactivated! Risk of frost, i.e. no protective heating or cooling function is provided!
Energy saving tips without sacri cing comfort:
• Air out rooms for short periods of time only, but properly, with the windows wide open
• Never allow the room temperature to exceed 21 °C through heating, and to fall below 25.5 °C through cooling
Button lock
•
To lock or unlock the buttons manually, press and hold the fan mode button for
3 seconds. The buttons are locked or unlocked in this manner if P14 is set to 2
•
If P14 is set to 1, the thermostat automatically locks the buttons 10 seconds after
the last adjustment
appears, indicating that
appears, indicating that
C Heat protection: ______________ C
tained at a lower or higher setpoint, thus saving
appears
be set to OFF. This means that the thermostat is