Majacraft Suzie Professional Manual - Página 9
Navegue en línea o descargue pdf Manual para Ruedas giratorias Majacraft Suzie Professional. Majacraft Suzie Professional 12 páginas.
También para Majacraft Suzie Professional: Manual (12 páginas)
9. Bobbin and Flyer
Required:
1 - Bobbin
1 - flyer
If you have some petroleum jelly or vaseline, rub a
small smear onto the flyer shaft. This has already
been done at the factory so is not essential. Now
slide the bobbin on.
At this point screw the flyer on to the flyer shaft. It may help to hold the whorl with your left hand
and tighten the flyer with your right (assuming you are right handed). It may also be treadled on by
holding the flyer in one hand and treadling the wheel in an anticlockwise direction.
10. Bobbin Bars
Required:
2 - Bobbin bars (in the hardware bag)
8f
9b
9
EXTRA
If you are not certain of the
connection arrangement, here is a full
description.Place the wheel directly
in front of you so you are looking at
the crank assembly attached to the
drive wheel. The rubber joiner that is
on the conrod/footman that is closest
to you goes into the hole in the pedal
on your left. The joiner on the conrod
that is furthest from you goes into the
hole in the pedal that is on your right.
8g
9a
9c
10a
majacraft