Adexa BAIN-MARIE Manual - Página 3

Navegue en línea o descargue pdf Manual para Electrodomésticos de cocina Adexa BAIN-MARIE. Adexa BAIN-MARIE 5 páginas.

Imprimir página
Instruction Manual
Thermostat:30-95C:
The numbers on the dial correspond with the grill plate temperature. The "0" position is off.
Power Indicator:
This light indicates the power on.
Heat Indicator:
This light indicates the element is heating. Once the set temperature has been reached the light will go out.
Unit will continue to maintain heat and temperature with the light cycling. This is not a power indicator light.
On&Off Power Switch ：
Water Lever Marks: Indicates the correct water level.
Thermal Cut-Out Reset
This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels the
appliance will automatically cut power. The Safety Cut-out switch is located on the underside of the
appliance. To reset the appliance after a sufficient cool-down period: 1. Press the small reset switch down
until it clicks, using a blunt pointed instrument. 2. The appliance is now reset and can be used as normal.
Feature:
 Large 20 litre capacity.
 High quality stainless steel finish.
 Wet heat operation only.
 Takes containers up to 150mm deep.
 Front mounted tap for easy draining & cleaning.
How to use it
1.
Connect the appliance to the power supply.
2. Fill the tank with water to a level between the 'MIN' and 'MAX' marks on the inside of the tank.
3.
Switch the power switch to the On position [I]. The red power indicator light will turn on.
4.
Turn the thermostat to the desired temperature to heat-up the appliance.
5.
Once the appliance has heated the water the power indicator light turns Off.
6.
Reduce the heat setting on the Thermostat to maintain temperature.
WARNING:
Do not allow the water to drop below the 'MIN' level during operation. Severe damage to the heating
element could result.
Recommend that fresh water be used each time the appliance is used.
Cleaning and Maintenance
 Wipe down the exterior of the appliance with a damp cloth.
 Some cleaning agents may cause damage when used for a prolonged period on stainless steel. Use a
suitable stainless steel cleaner.
 Dry the exterior thoroughly.
 Wash all removable parts in warm, soapy water.
WARNING :Electrical Shock Hazard
*Keep water and other liquids from entering the
inside of the equipment.
*Liquid inside the equipment could cause an electrical
shock.
*Do not spray the unit or controls with water or
cleaning products.
*Liquid could contact the electrical components and
cause a short circuit or an electrical shock.
*Do not use unit if power cord is damaged or has
been modified

Explosive view

Used to set or adjust the temperature of the cooking plate.
Turn on the power ,the power indicator "Green Light" would be on
3