DEBEZT I-988M3 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para GPS DEBEZT I-988M3. DEBEZT I-988M3 12 páginas. Gps tracking system
Imprimir página
Remark:
1. Vehicles must be connected to the ACC wire group can be
achieved remotely turn off features.
2. After user activate flameout function,vehicles will start up
flameout in 1 minute, it make the oil-circuit flameout or
power control flameout for a moving vehicle, it will likely
lead to vehicles can not normal safe driving, to ensure the
safety of vehicles traveling, we strongly recommend that
users turn off their engines after parking the vehicle
Special Note:
If there is any security problems and accidents because of
using the FLAMEOUT function, it has nothing to do with the
company.
4.18 System alarm for power failure
After the equipment is connected with vehicle power, when a power failure
occurs, the system will automatically send two SMS to the monitoring mobile phone:
System power failure, the latitude and longitude and The current specific
address, driving speed, direction,and other values about the vehicle.
- 10 -
5. Device's socket connection diagram
Selection of door triggering mode
Remark: Upon installation,
please select the proper
triggering mode in accordance
with the make and model of the
vehicle.
Positive door trigger wiring
Door dome lamp
Blue
Door swi tch
Negative door trigger wiring
Blue
Door dome lamp
Door swi tch
ACC wire connection
White
In car circuit
SOS switch
Ground connection
Connection to positive
of the battery pack
- 11 -
- 11 -
Take away the battery cover to select the door triggering
mode.
When door trigger jumper is selected "Door-", it
represents that the door triggering mode is selected as
negative. On the other hand, if jumper is selected "Door+",
then the door triggering mode is selected as positive.
Upon installation, please select the door triggering mode
in accordance with the make and model of the vehicle. The
default factory setting of the triggering mode is "Door-"
and representing that the door triggering is negative.
Remark:When the system is to be connected to
DC12V/24V+/- line of vehicle,make sure to connect the
trigger line of ACC to the trigger line of vehicle,otherwise
the system will not work properly.
Oil-channel flameout wiring
Green
Yellow
Red
Green
Flameout breaker
Engine power-off wiring
Green
Yellow
Red
Green
Flameout breaker
Please be mind to use of the engin flameout function
Connecting with door lock in-phase
Unlock
Lock
Original center locking
ORANGE
GREEN
YELLOW
BLUE
WHITE
RED
BLACK
RED