Adexa Luxury Electric Range Series Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Equipamiento alimentario comercial Adexa Luxury Electric Range Series. Adexa Luxury Electric Range Series 11 páginas. Electric tilting braising pan

Imprimir página
Instruction Manual
4. Precautions & Recommendations
4.1 Transportation and Storage
During transportation, the machine should be carefully handled and do not put it upside
down to prevent from damaging to the shell and inside. The packaged machine should be
stored in a ventilated warehouse without corrosive gas. If it needs to be stored in open air
temporarily, measurement against raining is needed.
4.2 Notice for Installment
1.
The appliance should be installed in a well-ventilated area with a hood or extractor,
ensuring the waste gas can be exhausted in time.
2.
Appliance connection should comply with relative provisions of electric equipment
safety requirements.
3.
The appliance is not suitable for built-in installation.
If the appliance is near walls, keep a clearance of ≮100mm.
4.
The cabinet is equipped with adjustable feet whose regulating range is ≥15mm.
5.
Making sure that the cabinet is level and stable.
6.
The supply voltage should comply with the working voltage of the appliance.
7.
The fixed arrangement of wire should be equipped with an all-poles disconnecting
switch with a contact opening of 3mm on its poles. It is advisable to install a
grounding leakage protection switch. Do not pile up sundries in front of the switch, for
convenient operation sake.
8.
After installation, check that whether the connection is loose, whether the voltage is
normal and whether the safety grounding is reliable.
9.
Before cleaning, cut off the power supply. Clean the appliance with a wet towel
containing non-corrosive detergent.
10. Vicinity of the mounting position should not store flammable or explosive objects. The
ambient temperature should be lower than 45℃ and the relative humidity should be
below 85％.
11. Installation of the appliance should be done by professional technicians.
12. The appliance should be positioned at a stable area with a minimum clearance of
10cm away from non-combustible substances (e.g. walls, windows etc.) on both
sides, and 20cm at back side.
13. Water connection: There is a water pipe connector in left front of the cabinet bottom,
connect the tap water pipe to it with DN15 connector.
4