Gamester Pro Racer RC71093 Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Mando de videojuegos Gamester Pro Racer RC71093. Gamester Pro Racer RC71093 2 páginas.
Imprimir páginaCONGRATULATIONS!
On choosing Pro Racer, the ultimate
PlayStation 2 driving peripheral.
Pro Racer can be used with all kinds of
PlayStation games, but is primarily designed
for use with driving games.
How to setup your Pro Racer
• Turn off your PlayStation 2.
• Insert the Pro Racer's plug into one of the
standard controller ports on your
PlayStation 2.
• Turn on your PlayStation 2.
Using your Pro Racer
(see fig.1)
The Pro Racer has all of the Buttons that you
would expect from a PlayStation controller. All
are clearly marked and used in exactly the
same way as normal. In addition, the Pro
Racer will function in three major modes:
• Negcon
• Vibra Force 2 Digital
• Vibra Force 2 Analog
fig.1
Negcon mode
This is a mode specifically designed for
steering wheels and may be required by some
driving games.
In this mode, the steering wheel handle,
buttons are all analog.
+
The rumble feature will not be active in this
mode.
To switch the Pro Racer to Negcon mode follow
these steps.
• Press and hold the MODE button down for
2 seconds and release. The LED will flash to
let you know that you're in Negcon
mode.
Vibra Force 2 digital
This is the best option for non-driving games,
but you may find that you prefer it for some
driving games too.
In this mode the steering wheel handle,
buttons are all digital.
+
The rumble feature should be active in this
mode.
This is the default mode for the controller and
the LED is off .
Vibra Force 2 analog
This is the best option for driving games.
In this mode, the steering wheel handle and
buttons are all analog.
The rumble feature should be active in this
mode.
To switch the Pro Racer to analog mode follow
these steps.
• Press the MODE button once. The LED will
turn on to let you know that you're in analog
mode.
TROUBLESHOOTING
The Pro Racer is not working at all.
• Make sure that the Pro Racer plug is firmly
connected to the PlayStation 2 controller
port.
• Try to change modes.
The rumble feature is not working.
• Make sure that the vibration feature is
activated in the game itself.
• Make sure that the game your playing is
compatible with the official Sony dual shock
controller.
MAINTENANCE
• Handle this product carefully.
• Store this product away from dusty or dirty
areas.
• Keep this product away from moisture or
temperature extremes.
• Do not disassemble this product. If a
problem occurs, consult your warranty card
for replacement instructions.
Please retain this for future reference.