Centric Air RT2 Manual del usuario y del instalador - Página 5
Navegue en línea o descargue pdf Manual del usuario y del instalador para Controlador Centric Air RT2. Centric Air RT2 8 páginas. Wireless whole house fan control
Imprimir páginaChange the Fan Speed
For single speed WHFs, the fan speed will be displayed as Hi and cannot be adjusted. For 2 speed WHFs, the speed
can be adjusted by pressing the Fan Speed and using the UP and DOWN Keys.
Changing 2-Speed WHFs
Press here to change
the WHF speed.
Use the UP and DOWN keys to
Link
ed
select the fan speed then press
ENTER.
Econo
Cooling
ON
Menu
Enter
High speed (Hi)
Low speed (Lo)
Homes with plaster walls with steel lathe may
experience wireless communication interference
when using wireless controls.
!
CAUTIONS
Turn off power before installing whole house fan or
WHF controls.
Read and follow all instructions carefully, including
those included with the whole house fan.
Read entire manual before installing products.
Follow all local electrical codes during installation. All
wiring must conform to local and national electrical
codes.
Installation should be performed by a qualified
individual with sufficient experience and skill.
Use cautions when mounting components to surfaces
that may have concealed wiring beneath the surface.
When servicing WHF Controls or accessing products,
turn off all power to these items.
HOMEOWNER - WHF OPERATION
Outdoors
Indoors
o
F
Cool
Link
ed
Set To
Econo
Cooling
ON
Menu
INSTALLATION
ATTENTION INSTALLER
1)
If not already done, connect the WHF to the RM2
radio module using the plug&play cable provided.
2)
Install optional Outdoor Temperature Sensor and
wire to the RM2.
3)
Set Installer Options
Select Fan Speed
An optional Damper Control can be installed. See
the Damper Control Manual for wiring information.
5