Aguilar AG 500SC Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Amplificador Aguilar AG 500SC. Aguilar AG 500SC 7 páginas.

II. Features and Functions

A. Front Panel Features

Input Pad:

-10dB

Preamp Section:

Bright

: +5dB >4kHz shelving

Treble

: +/- 13dB @ 4kHz shelving

High Mid

: +/- 14dB @ 800Hz peaking

Low Mid

: +/- 14dB @ 400Hz peaking

Bass

: +/- 18dB @ 40Hz shelving

Deep

: +6dB <100Hz shelving

Effects Loop Section:

Send

Adjust the level of the

performance from your effects unit.

Return

(This range of signals can be adjusted to get the nominal output

level at the speaker output.) Adjust this knob to optimize the signal

level returning from the Effects Loop. If it is turned up too high,

you can clip the return circuitry of the AG 500. If it is turned down

too low you might not be able to get loud enough.

Pull –20dB

This allows you to use a studio effects unit (line level) or a stomp

box (instrument level) in the Effects Loop. If the signal returning

from the Effects Loop is too quiet, pull this knob to boost the

Return signal.

: Output level = -infinity to +22dBu

Send

: Sensitivity = -20dBu to +infinity

: Boosts the level of the

output to get the maximum

Return

signal by 8dB.