Bristan DSC 3HBAS C Manual de instrucciones de instalación - Página 12
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Bristan DSC 3HBAS C. Bristan DSC 3HBAS C 16 páginas. Descent tap range
También para Bristan DSC 3HBAS C: Instrucciones de instalación y manual de usuario (18 páginas)
Imprimir páginaMaintenance
General Cleaning
Your product has a high quality finish
and should be treated with care to
preserve the visible surfaces. All
surfaces will wear if not cleaned
correctly, the only safe way to clean
your mixer is to wipe with a soft damp
cloth. Stains can be removed using
washing up liquid. All bath cleaning
powders and liquids will damage the
surface of your fitting, even the non-
scratch cleaners.
Note: Never use abrasive detergents
or disinfectants or those containing
alcohol, hydrochloric acid or
Cleaning
Before carrying out any maintenance,
turn off both water supply or close any
isolating valves to the tap.
Prise out the handle cap, losen the
grub screw using a 2.5mm hexagonal
key and remove the handle. Remove
the spline adaptor. Remove the valve
using the correct size spanner socket.
Wash the valve with clean running
water and make sure that any debris
has been removed.
If necessary replace the valve using
parts supplied by Bristan only.
Lightly grease the seal (only use
silicone grease), replace the valve
shroud, spline adaptor, screw and the
handle. Tighten the grub screw and
push fit the cap.
12
Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.
Grub
Screw
Handle
Screw
Important: Tighten the valve with
the correct size socket and apply
appropriate force/torque.
Do not overtighten.
2.5 mm
hexagonal key
Cap
Spline
Adaptor
Valve
Tap body