Bristan DSC WMBF C Instrucciones de instalación y manual de usuario - Página 14
Navegue en línea o descargue pdf Instrucciones de instalación y manual de usuario para Productos de fontanería Bristan DSC WMBF C. Bristan DSC WMBF C 18 páginas. Descent tap range
También para Bristan DSC WMBF C: Manual de instrucciones de instalación (16 páginas)
Imprimir páginaMaintenance
General Cleaning
Bristan products are made from premium materials, with hand polishing
and electroplated finishes.
Your taps or shower should be regularly cleaned with warm water, a mild
pH-neutral liquid soap, and polished with a soft cloth. Any residues from
soap, toothpaste, shampoos and shower gels can cause blemishes if not
rinsed off straight after use.
Household bleaches and cleaners contain harsh chemicals and may damage
the surface finish. Avoid using abrasive cloths, scouring pads, scrub sponges,
steel wool or anything similar.
Some surfaces such as nickel and pewter may be affected by the dye found
in some cloths, so it is also important to avoid hanging cloths on spouts.
Cleaning
Before carrying out any
maintenance, turn off both water
supply or close any isolating valves
to the tap.
Prise out the handle cap, loosen
the grub screw using a 2.5mm
hexagonal key and remove the
handle. Remove the spline adaptor.
Remove the valve using the
correct size spanner socket. Wash
the valve with clean running water
and make sure that any debris has
been removed.
If necessary replace the valve
using parts supplied by Bristan
only.
Lightly grease the seal (only use
silicone grease), replace the valve
shroud, spline adaptor, screw and
the handle. Tighten the grub screw
and push fit the cap.
Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
14
Grub
Sc rew
Handle
Sc rew
Important: Tighten the valve
with a 17mm socket and apply
appropriate force/torque.
Do not overtighten.
2.5 mm
hexagonal key
Ca p
Spline
Adaptor
Valve
Tap body