Bristan GLD2 BF C (D1) Instrucciones de instalación y manual del usuario - Página 2

Navegue en línea o descargue pdf Instrucciones de instalación y manual del usuario para Productos de fontanería Bristan GLD2 BF C (D1). Bristan GLD2 BF C (D1) 4 páginas.

Imprimir página
Important
The images shown are for
illustrative purposes only.
The tap you have purchased may
look different to those pictured in
this booklet but will follow the same
installation steps.
Your contents page will be specific
to your product.
If you find your product or any of
its components differ from those
shown on the contents page, please
contact our customer support.
1*
3
Connect the hot and
cold water supplies to
the threaded tails
Hot
You may be required to
secure the plinth to the
tap with a grub screw
If the hole is not
directly visible on the
plinth, check underneath
rubber seal
Ensure rubber seal is in
place once plinth is
attached
Cold
Your tap is now
ready to use
Installation
1
2
To secure the taps to the bath, use a box spanner
to tighten the metal backnuts underneath
ensuring the washer is correctly positioned in
between the backnuts and the bath
General Cleaning
Bristan products are made from premium
materials, with hand polished, electroplated,
PVD or EPD finishes.
Your taps or shower should be regularly
cleaned with warm water, a mild pH-neutral
liquid soap, and polished with a soft cloth.
Any residues from soap, toothpaste,
shampoos and shower gels can cause
blemishes if not rinsed off straight after use.
Household bleaches and cleaners contain
harsh chemicals and may damage the surface
finish. Avoid using abrasive cloths, scouring
pads, scrub sponges, steel wool or anything
similar.
Feed the tap body through
the plinths and ensure
rubber plinth seals are
in place
Your model may come
with a plinth and will
either be included
pre-attached or loose in
the box*
Once aligned, feed the
threaded tails through
tap holes