Bristan PIV BSM C Manual de instrucciones de instalación - Página 10

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Productos de fontanería Bristan PIV BSM C. Bristan PIV BSM C 16 páginas.

Installation Cont.

Wall Mounted Basin Mixer / Bath Filler

1. Decide on the final position of the basin

mixer/ bath filler. Install suitable battons into

the wall cavity if required to support the tap

body.

2. Plumb the hot and cold water supply pipes to

the required position.

3. Secure mixer body using the screws and wall

plugs supplied.

4. Attach the supply pipework to the hot and

cold inlets (hot on the left and cold on the right

when viewed from the front) ensuring the olive

is fitted to the copper pipe work. Tighten the

compression nut to secure the pipework and

create a water tight seal.

Note: Before finishing the wall surface turn on

both water supplies to check for any leaking

connections.

5. Finish the wall surface.

Note: It is important that a sufficient amount

of the spout connecting tube is left exposed to

allow the spout to connect.

6. Push the plinths onto the valve shrouds and

secure by tightening the grub screws.

7. Attach the spout to the concealing plinth

using the screws supplied.

8. Push the spout onto the spout connecting

tube ensuring the o-rings on the spout

connecting tube have located inside the spout.

Tighten the grub screws to secure the spout in

place.

9. Push the handles onto the valves and tighten

the grub screws.

10. Turn on both water supplies and operate the

handles letting the water flow for a few minutes

to flush the system.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.