IKEA ENHET Manual de instalación - Página 6

Navegue en línea o descargue pdf Manual de instalación para Mobiliario interior IKEA ENHET. IKEA ENHET 16 páginas. Kitchen
También para IKEA ENHET: Manual de instalación (10 páginas), Manual de instalación (20 páginas)

Imprimir página

Preparing your room

Start by installing the supporting strips. You can use

any straight long piece of wood available at your local

hardware store.

To install the supporting base strip, align the top

of the strip with the baseline (125mm). Screw the

strip to the studs you found behind your walls along

where your base cabinets will be located. Make sure

the strip does not go beyond where the last cabinet

ends or it will collide with your plinth at the end.

Assembling cabinets and frames

Before you start assembling the

cabinets, set up a good work area

that is safe and where you have

enough room. Be sure to protect

the floors and make sure you have

the recommended equipment and

tools close by.

Sort the packages into groups to

avoid confusion over which pieces

belong to the cabinet assembly

and which belong to appliances.

For a good workflow, it is a good

idea if you assemble all frames one

by one and push them aside until

the time comes to install them.

It's helpful if you arrange your

cabinets in the order you will be

installing them. Use your packing

list and ENHET Configurator

drawing to guide you.

Note: Don't install a supporting base strip behind

ENHET open base frames, nor the dishwasher.

ENHET cabinets can be installed with or without a plinth, depending on your personal preference.

See page 12 for information on how to assemble the legs if you choose to have a plinth.

For the upper strips, align the top of the strip with

the 1466mm line. Then screw the strips to the studs

you've located behind your wall. The upper strips

are only temporary and will be removed once you've

installed the cabinets.