AIRFLO AFS140 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Electrodomésticos de cocina AIRFLO AFS140. AIRFLO AFS140 7 páginas. Hand held steamer

test a small inconspicuous spot before proceeding.

11. The Extension Hose (11) connects to the Steam Nozzle and is designed to provide

additional freedom to easily reach a variety of spaces. The Jet Nozzle should be

connected to the male end of the Extension Hose in order to safely focus the ﬂow of

steam.

12. The Measuring Cup (12) provides an easy and convenient way to consistently ﬁll the

Boiler with the optimum amount of water (6 oz. / 180 ml.).

Assembling Your Hand Held Steamer

CONNECTING JET NOZZLE

WARNING: DO NOT attempt to connect any accessories while unit is emitting steam. Doing so could

result in burns or other injury.

1. Align Jet Nozzle with Steam Nozzle as shown (FIGURE 1-A). Jet Nozzle should be sideways 90º

counter-clockwise from its ﬁnal position. Guide keys on Jet Nozzle should line up with key slots on

base of Steam Nozzle (FIGURE 1-B).

FIGURE 1

2. Slide Jet Nozzle onto Steam Nozzle - guide keys should ﬁt into key slots. Push Jet Nozzle on as

far as it will go. Rotate Jet Nozzle 90º clockwise, turning it until it will move no further (FIGURE 2).

GUIDE KEYS

KEY SLOTS

FIGURE 2

Connecting brushes

NOTE: The Nylon Utility Brush, Brass Utility Brush and Large Brush are all attached in the same

manner. The Nylon Utility Brush is illustrated in FIGURE 3 as an example.

Align Brush with Jet Nozzle as shown. Guide key on back of Brush should line up with key slot

on side of Jet Nozzle tip (FIGURE 3).

Firmly press Brush onto Jet Nozzle (FIGURE 3).

CAUTION: Make sure Brush is pushed as far as possible onto tip to ensure that it is sealed

securely.

This will prevent steam leaks and ensure that Brush is not forced off of Jet Nozzle by

steam pressure.

FIGURE 3

GUIDE KEYS

KEY SLOTS